Chips Pet Kelas Tekstil Dijual

$850≥1Ton

Jenis pembayaran:	L/C,T/T,D/P,D/A,Paypal
Inkoterm:	FOB,CFR,CIF
Min. Memesan:	1 Ton
Transportasi:	Ocean
Pelabuhan:	shanghai,ningbo,zhangjiagang

Hubungi sekarang

Deskripsi Produk

Atribut Produk

& pengiriman paket

Deskripsi Produk

Atribut Produk

Tempat Asal: Cina

IV: 0.85IV

& pengiriman paket

Menjual unit

Ton

The file is encrypted. Please fill in the following information to continue accessing it

Deskripsi Produk

Klasifikasi: Serat stapel, filamen, pencetakan dan pewarnaan, pemintalan.

Properti: Chip poliester adalah polimer dengan struktur amorf. Viskositas produk ini: 0,71 (plus atau minus 0,01) dl/g, larut dalam fenol-tetrachloroethane, o-chlorophenol dan pelarut lainnya, dengan higroskopisitas minimal, resistensi asam, stabilitas kimia lebih tinggi daripada poliamida, dan resistansi cahaya yang baik.

Tujuan utama: Chip poliester tingkat serat cocok untuk memutar berbagai serat dan filamen stapel poliester, dll., Dan membuat berbagai kain pakaian, kabel dan filter kertas tenunan. Bentuk pengemasan: dikemas dalam kantong plastik polypropylene.

Indeks Kualitas:

Item dan indikator kinerja Pet Polyester Grade (PET)

serial number	project		Bright, semi-matte			total extinction
serial number	project		Premium	First grade	Qualified product	Premium	First grade	Qualified product
1	Intrinsic viscosity/(dL/g)		M1a±0.010	M1±0.013	M1±0.025	M1±0.010	M1±0.013	M1±0.025
2	Melting point/℃		M2b±2	M2±2	M2±3	M2±2	M2±2	M2±3
3	Content of terminal carboxyl group/(mol/t)		M3±4	M3±4	M3±5	M3±4	M3±4	M3±5
4	Chroma	L value	report value	report value	report value	report value	report value	report value
4	Chroma	b value	M4d±2.0	M4±3.0	M4±4.0	M4±2.0	M4±3.0	M4±4.0
5	Moisture (mass fraction)/%≤		0.4	0.4	0.5	0.4	0.4	0.5
6	Aggregated particles/(pieces/mg)≤		1	3	6	1	3	6
7	Diethylene glycol content (mass fraction)/%		M5e±0.15	M5±0.20	M5±0.30	M5±0.15	M5±0.20	M5±0.30
8	Iron/(mg/kg)≤		2	4	6	2	4	6
9	Powder/(mg/kg)≤		100	100	100	100	100	100
10	Abnormal section (mass fraction)/%≤		0.4	0.5	0.6	0.4	0.5	0.6
11	Titanium dioxide content (mass fraction) / %		M6f±0.03	M6±0.03	M6±0.06	M6±0.20	M6±0.20	M6±0.30
12	Ash content (mass fraction)/%≤		0.06	0.07	0.08	0.07	0.08	0.09
aM1 is the central value of intrinsic viscosity, which is determined by negotiation between the supplier and the buyer, and shall not be changed arbitrarily after determination. bM2 is the central value of the melting point, which is determined by both the supplier and the buyer within the range of 252°C to 262°C, and shall not be changed arbitrarily after determination. cM3 is the central value of the terminal carboxyl group content, which is determined by the supply and demand sides within the range of 18mol/t~40mol/t, and shall not be arbitrarily changed after determination. dM4 is the central value of the chromaticity b value, which is determined by the supply and demand sides within the range of <8.0, and shall not be arbitrarily changed after determination. eM5 is the central value of diethylene glycol content, which is determined by both the supply and demand sides within the range of 0.80% to 2.00%, and shall not be arbitrarily changed after determination. fM6 is the central value of titanium dioxide content, which shall not be changed arbitrarily after it is determined. The content of titanium dioxide may not be measured for glossy polyester chips.